Pile Hoists

This classic, compact design allows for two or more wire ropes to be driven from the same motor in a compact hoist, ensuring consistent operation throughout the life of the hoist. The standard pile hoist solution is designed to meet the needs of venues where a long batten, lighting bar or low speed scenery bar needs to be lifted to ensure that equipment can be accessed safely from the ground.

The design of the pile hoist removes many of the problems associated with lift cables spooling badly onto the cable drum. As the cable 'piles' into ever-increasing diameters on the drum, the 'load capacity' of the hoist becomes dependent on the distance the load needs to be lifted. The shorter the height of lift, the higher the lifting capacity.

Two configuration options are available: a basic version for the budget conscious with only basic up/down operation, and a professional version which includes components for advanced functions, including networking and self-monitoring.

EPH-100

  • Variable Lift capacity: 100kg for 10m drift, to lift capacity 150kg for 2.5m drift; (Max 10m Drift)
  • 3mm 7 x 19 Solid Core Galvanised Steel Wire Rope (Black SWR Option)
  • Average speed 7.6 metres/min; Typical Hoist Mass 34kg
  • 1-4 line systems
  • Control by 400W variable speed inverter
  • 240 Volt 7Amp 50Hz single phase supply (may be RCD protected)

EPH-300

  • Variable Lift capacity: 300kg for 10m drift, to lift capacity 400kg for 4m drift; (Max 12m Drift)
  • 5mm 7 x 19 Solid Core Galvanised Steel Wire Rope (Black SWR Option)
  • Average speed 8 metres/min; Typical Hoist Mass 82kg
  • 1-7 line systems
  • Control by 750W variable speed inverter
  • 240 Volt 10A 50Hz single phase supply (may be RCD protected)

EPH-500

  • Variable Lift capacity: 550kg for 10m drift, to lift capacity 725kg for 5m drift; (Max 12m Drift)
  • 5mm 7 x 19 Solid Core Galvanised Steel Wire Rope (Black SWR Option)
  • Average speed 8 metres/min; Typical Hoist Mass 120kg
  • 1-7 line systems
  • Control by 1500W variable speed inverter
  • 240 Volt 20A 50Hz single phase supply (may be RCD protected)

EPH-800

  • Variable Lift capacity: 800kg for 12m drift, to lift capacity 1100kg for 3m drift; (Max 12m Drift)
  • 5mm 7 x 19 Solid Core Galvanised Steel Wire Rope (Black SWR Option)
  • Average speed 8.5 metres/min; Typical Hoist Mass 200kg
  • 1-7 line systems
  • Control by 2200W three phase variable speed inverter
  • 415 Volt 4.5A 50Hz three phase supply with Neutral and Earth

ENGINEERED SOLUTIONS FOR A CREATIVE WORLD
-